Sunday, November 15, 2026 • 07:08 PM
  • Home
  • /
  • AIoT Fleet Management Software
  • /
  • Putting Fleet Data in Context: Lessons From Real-World Truck Testing
AIoT Fleet Management Software
Insights

Putting Fleet Data in Context: Lessons From Real-World Truck Testing

By Dr. Dean Bushey, Director of Programs, North American Council for Freight Efficiency (NACFE)

Post Image

In a real-world demonstration last year, diesel trucks saw their efficiency vary by about 30% between flat corridors and mountain passes. Most of that swing came from the terrain.

Telematics devices on trucks today report location, speed, fuel use, tire pressure and how the driver uses the throttle and brakes. AIoT, the artificial intelligence of things, pairs those connected sensors with AI that analyzes what they report. But if fleet software ranks drivers by MPG without accounting for the route, it can end up blaming the driver who got the mountain run for low MPG.

Much of my work at NACFE involves measuring trucks doing real work. The figures in this article come from NACFE's published demonstrations and studies, including Run on Less – Messy Middle in 2025 and the Fleet Fuel Study. Software helps when it measures what drives cost and shows the conditions behind it.

Look Past the Headline MPG

In that 2025 demonstration, 13 fleets ran 14 Class 8 tractors on four energy pathways, including diesel. The operations report, published in March 2026, found that terrain was the most significant performance variable.

The best diesel results reached 11.8 MPG. Based on federal data, the national average for all combination trucks is about 6.9 MPG. Actual performance varied with terrain, duty cycle, payload and driver behavior. None of that shows up on a spec sheet.

The 2024 Fleet Fuel Study, the most recent edition, with the next due out Nov. 19, found that 14 fleets running 75,000 trucks averaged 7.77 MPG in 2023. That saved an estimated $512 million versus the average truck on the road. It also found that a shift to regional haul and shorter routes lowers average MPG, which is why ranking a regional-haul truck against a long-haul truck is misleading.

In my experience, the gap between the best fleets and the rest comes from many small decisions, measured and managed over time, more than from any one piece of technology.

Give Every Sensor Reading Some Context

The value of AIoT is putting each data point next to the load, the route, the grade, the weather and the driver, so you know why something happened and what to do about it. Take tires. According to NACFE's 2020 Low Rolling Resistance Tires Confidence Report, rolling resistance accounts for 30% to 33% of a truck's total fuel consumption, so a 10% cut in rolling resistance saves about 3% in fuel.

NACFE's Tire Pressure Systems Confidence Report found that running with all tires 10 psi low raises fuel consumption by 0.5% to 1.0%. It also cited studies finding only 46% of tractor tires and 38% of trailer tires are within 5 psi of the target pressure. A tire sensor can tell you a drive tire on truck 214 is running low. A good AIoT system adds the load, the grade and weather ahead, and helps the shop decide, within the fleet's tire policy, whether to bring the truck in now or at the next stop.

That only works if the data is comparable, which means knowing what the truck was carrying and how hilly the route was.

Coach Drivers and Check the Settings

Driver skill alone can swing MPG by 30% or more, NACFE and others have found. There are no average drivers, trucks, routes or loads. Idling, empty backhauls, seasonal fuel and freight density all play a part.

Speed is still one of the biggest factors in a truck’s MPG, and the Fleet Fuel Study found that truck speeds remain high. A rough rule of thumb is that every mph over 60 costs about one-tenth of a mile per gallon, and the penalty grows faster at higher speeds. A 2015 NACFE report on programmable engine parameters estimated, based on fleet and engine-maker input, that fleets running new trucks on factory default settings could gain 3% to 5% by setting a few key parameters, such as speed limits and idle reduction.

The 2025 demonstration found that driver training, performance incentives, maintenance discipline and dispatch strategy all shaped the results.

Put speed, idle and braking data next to the route and the load, and you can see which drivers could use some coaching and which trucks need maintenance. Route and payload history is also a better guide for spec'ing the next truck than a brochure.

Test AI Claims on Your Own Routes

I want to see AI and automation claims measured on the road before I believe them. Predictive cruise control and similar software make real-time decisions on the truck, adjusting speed as conditions change. Results depend on terrain, traffic and settings, so one route's savings number may not carry over to another. The same goes for autonomous trucks and any AI fuel-savings claim.

Any AI tool depends on the data behind it. Before rolling one out, ask the vendor how the results were checked, on what routes and against what baseline.

Bring the Data Together in One Place

I think the next step for fleet management software is bringing vehicle, tire, weight, route, weather and driver data into one system, so a fleet can see the full cost of moving a load. That would give fleets a cost-per-mile figure they can trust for whatever trucks they run, plus cost per ton-mile where weight is the limit. I'd also trust vendors more when they show how they tested their claims with real payloads.

We hold Run on Less every two years, and as we plan the 2027 edition, better payload data is one of the things we're working on.

Start With What You Have

Know your duty cycles and group trucks based on them before you compare results. Normalize fuel and cost data for weight and route. Test new technology on a few trucks against a clear baseline before you roll it out.

Much of the data fleets need is already coming off their trucks. The fleets that come out ahead will judge every number by the road it was earned on.

  • By Dr. Dean Bushey
  • 2026-11-06 04:43:26

Latest News

United Airlines Draws the Line on AI Travel Agents and Automated Flight Bookings Aviation
News Image
Smart Transportation

Smart Cities Get a Boost From...

By Editorial Panel, Transportatio...

News Image
Fleet Management

Congressional Proposal Could E...

By Editorial Panel, Transportatio...

News Image
Transport Financing

BMO Reshapes Transportation Fi...

By Editorial Panel, Transportatio...

News Image
Sustainable Transport

Geotab Puts Sustainable Transp...

By Editorial Panel, Transportatio...

News Image
Aviation

Electra Maps Out a New Era of...

By Editorial Panel, Transportatio...

Transportation outlook

At Transportation Business Outlook, we believe in the power of knowledge-sharing. Our editorial approach focuses on expert opinions, CEO interviews, market analysis, and success stories, offering readers a comprehensive view of the challenges and opportunities shaping the transportation landscape.